




The Synergistic Mechanism of Reflection and Blocking
The basic structure of aluminum foil bubble insulation is not complex: the inner and outer surfaces are aluminum foil composite layers, the middle layer consists of polyethylene (PE) air bubbles or XPE foam, and the whole forms a sandwich composite structure. It is precisely this structural design that gives the material its unique thermal management capabilities.
The aluminum foil surface has very low emissivity, typically between 0.03 and 0.05, meaning it absorbs very little radiant heat, while its reflectivity can exceed 95%. In summer, much of the infrared heat in solar radiation is reflected back to the outside by the aluminum foil layer. In winter, far-infrared radiation from indoor heating is likewise reflected back indoors, creating a two-way effect of summer heat rejection and winter heat retention. The middle polyethylene bubble layer effectively suppresses conductive and convective heat loss through sealed, still-air cells. Air itself is an excellent insulating medium, and the bubble structure fixes the air in separate cavities, preventing heat exchange caused by air movement.
It is worth emphasizing that the effectiveness of the aluminum foil reflective layer depends on one key condition: the reflective surface must face an air space. If the foil is compressed directly against a wall panel or structural surface, radiation is no longer the dominant heat transfer mode, and the advantage of low emissivity cannot be realized. Therefore, during installation, ensuring an appropriate air space between the foil surface and adjacent building components is a necessary condition for the material’s performance.
Pure Aluminum Foil vs. Metallized Film: Performance Differences Should Not Be Overlooked
Reflective insulation on the market generally falls into two categories: one uses pure aluminum foil, usually with a purity of more than 99%, and the other uses metallized PET film (VMPET). The two look similar, but their performance differs significantly.
Pure aluminum foil can achieve a reflectivity of 95% to 97% and remains stable over long-term use, with little susceptibility to humidity. Metallized film costs less and weighs less, but its reflectivity is usually below 85%, and the reflective layer may degrade in high-humidity environments. Simply put, metallized products are suitable for cost-sensitive, lightweight applications, while pure aluminum foil remains the more reliable choice for applications requiring long-term, dependable thermal performance—such as building roofs, industrial pipelines, and cold-chain facilities. When purchasing, users are advised to request reflectivity test reports based on standards such as ASTM E408 from suppliers to avoid the risk of metallized products being substituted for pure aluminum products.
From Construction to Industry: Applications Continue to Expand
The application of aluminum foil bubble insulation has extended from early color-coated steel factory buildings and residential roofs to more specialized fields. In construction, it is used for metal roof insulation, wall insulation, underfloor heating reflective layers, and attic insulation. In industry, its use is also increasingly common in HVAC duct wrapping, water heater insulation jackets, and anti-convection layers for long-distance heating pipelines.
Academic research has also verified its engineering value. An experiment on roof insulation for prefabricated substations showed that after using an aluminum foil bubble composite, the inner surface temperature of the roof was significantly lower than with traditional extruded polystyrene (XPS) board. When the number of bubble layers was two and the bubble diameter was 12 mm, thermal conductivity could be as low as 0.028 W/(m·K), effectively reducing air-conditioning energy consumption by 15% to 30%. In addition, in grain storage, aluminum foil bubble insulation blankets used as roof coverings for large flat grain warehouses can effectively control the rise in warehouse temperature and grain temperature, alleviating the problem of upper-layer grain temperature rising easily.
Standards Are Becoming More Complete
Industry standards are providing clearer benchmarks for product quality. In early 2026, the International Organization for Standardization (ISO) published ISO 21239:2026, Thermal insulation products for buildings — Reflective insulation products — Specification, which sets out clear requirements for factory-made insulation products containing reflective or low-emissivity surface components. Earlier, ISO 22097:2023 had already specified methods for determining the thermal performance of reflective insulation products. The introduction of these standards means that performance evaluation of reflective insulation is moving from “manufacturer claims” to “international benchmarking,” providing users with a more reliable reference for product selection.
Conclusion
The value of aluminum foil bubble insulation does not lie in the prominence of a single metric, but in its systematic response to conduction, convection, and radiation. As building energy efficiency standards continue to rise and industrial requirements for energy management become stricter, this lightweight, flexible, and easy-to-install composite material is moving from a “supplementary material” to a “primary choice” in more applications. For insulation buyers, understanding how it works and the key points of product selection is more meaningful than simply comparing prices.
Suzhou Star New Material Group Co., Ltd. has been continuously investing in R&D in the field of thermal insulation materials since its establishment in 1999. In 2009, it obtained a domestic first-of-its-kind invention patent. In 2013, it passed the highest-level fire performance test by Australia’s AWTA. Its products are widely used in construction projects, industrial pipelines, storage facilities, and other applications. For more product information, please visit the company’s official website or contact the sales team.